The CM-6200 with 22pins D38999 is a fully rugged managed gigabit Ethernet switch specially designed to operate reliably in harsh climatically and noisy electrical demanding environments.
CM-6200 MIL SERIES | 22pins D38999 – MILITARY ETHERNET SWITCH
$0.00
The CM-6200 with 22pins D38999 contains ruggedized managed gigabit Ethernet switches specially designed to operate reliably in harsh climatically and noisy electrical demanding environments (e.g. high altitude, extreme shock, and vibration, wide temperatures, humidity, dust, and water exposure, noisy EMI, dirty power) of military applications. The switches enable modularity and provide growth while delivering optimal performance for Size, Weight, Power, and Cost (SWaP-C) constrained military applications onboard military vehicles.
| CONNECTORS | 16 – 10x 22 pins D38999 for 20x 1G-T and 4x 10G-SR in one MT38999, 17 – 10x 22 pins D38999 for 20x 1G-T and 2x 1G-SX and 2x 10G-SR in one MT38999, 18 – 10x 22 pins D38999 for 20x 1G-T and 4x 1G-SX in one MT38999, 2C – 10x 22 pins D38999 for 20x 1G-T, 58 – 10x 22 pins D38999 for 20x 1G-T and 2x 1G-SX and 2x 10G-SR in one D38999, 6B – 9x 22 pins D38999 for 18x 1G-T, 2x 1G-SX in one D38999 and 4x 10G-SR in one D38999 |
|---|
Key Features
Product Data
- Up to 24 x 10/100/1000Base-Tx ports in D38999 or FAS-T connectors and up to 4 x 10gigabit ports in FAS-T connectors or a MT38999 connector
- Approved for military environmental and EMC requirements
- PTP 1588 Grand Master Clock (GMC) or Transparent Clock/Slave Clock (TC/SC) with PTP version translation (v1/v2) support
- Built-in GNSS receiver
- Time synchronization output interfaces such as GNSS emulation, PPS, IRIG-B 002 (DC) or IRIGB 122 (AM)
- NMEA/PPS (external GNSS receiver) or IRIGB-002 (DC) as time base input
- NTP server
- High end OCXO for extreme clock hold-over capability
- A Li battery for powering of the local clock can be used to ensure clock hold-over support when unit is without power. The battery has a lifetime of more than 10 years
- Network redundancy based on MSTP/RSTP/STP and/or HSR (option) on the 2 x 1G-SX ports
| Ethernet ports | |
| 10/100/1000BASE-T 1000BASE-SX 10GBASE-SR |
20 2 2 |
| Switch protocols | |
| Standards | IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1X for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 1588 (PTPv1 and PTPv2) |
| MAC table | 32768 MAC addresses |
| Priority queues | 8 |
| Switch fabric properties | Store-and-forward and full wire speed on all ports |
| Security Features | Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic. Radius centralized password management SNMPv3 encrypted authentication and access security |
| Management | HTTP/HTTPS, telnet/SSHv2, CLI and SNMP v1/v2/v3 |
| Built-in test | Built-in test procedure performed at boot time. Continuous BIT procedure when device is powered |
| Other protocols | IGMP snooping (up to 1024 multicast filters) Static multicast filter setting Port rate limiting DHCP TOS/Diffserv supported Quality of Service (802.1Q) for real-time traffic VLAN (802.1Q) with VLAN tagging and MVR Port configuration, status, statistics, monitoring, security |
| Other I/O | |
| RS232 | 1 port, settings: 115200, N, 8, 1 (CLI console) |
| PPS | Pulse-Per-Second (PPS) output |
| IRIG-B | IRIG-B DC input, IRIG-B DC output (10V into 50Ohm load) and IRIG-B AM output |
| Connectors | |
| Ethernet copper connectors | D38999 |
| Ethernet fiber connectors | MT38999 |
| GPS antenna connector | Huber+Suhner QN coax connector (24-QMA-50-2-2) |
| Power connector | 5 pin MMP |
| Connector spacing | According to MIL-STD-1472F |
| Data Zeroization Support | |
| Data Zeroization | To erase Non-Volatile Flash Memory and Restore Board to Factory Default Config- uration. Available via HTTP and CLI |
| Power | |
| Power Consumption (Typ.) | 58W |
| Overload Current Protection | Yes |
| Reverse Polarity Protection | Yes |
| Power input | 28VDC (22-32VDC) |
| Hold-up | 100ms |
| Physical Characteristics | |
| Enclosure | Aluminum case |
| Dimension (W * D * H) | 250mm (W) x 148.5mm (D) x 106.4mm (H) / 9.84in (W) x 5.85in (D) x 4.19in (H) |
| Weight | 4350g / 9.590lbs. |
| Surface finish | Powder paint on top of SurTec 650 |
| EMC/Environmental | |
| Conducted Emission | MIL-STD-461F: CE102, 10KHz – 10MHz, power leads |
| Conducted Susceptibility | MIL-STD-461F/G: CS101, Power Leads; CS114, Bulk Cable Injection, 10 KHz – 200 MHz; CS115, Bulk Cable Injection, 10 KHz – 200 MHz; CS116, Damped Sinusoidal Transients, Cables and Power Leads, 10 KHz – 100 MHz; CS118, Personnel Borne Electrostatic Discharge (ESD) |
| Radiated Emission | MIL-STD-461F: RE101, Magnetic Field, 30Hz – 100KHz, Army; RE102, Electric Field, 2MHz – 18GHz for navy mobile and army ground conditions |
| Radiated Susceptibility | MIL-STD-461F: RS103, 2MHz-40MHz, 200V/m |
| Power input | MIL-STD-1275E; DEF STAN 61-5, Part 6, issue 6 |
| Operational Temperature | MIL-STD-810G: 501.5, 502.5 and 503.5, [-40..+71]C◦ |
| Storage Temperature | MIL-STD-810G: 502.5, [-40..+85]C◦ |
| Altitude | MIL-STD-810G: 500.5, 85.000ft |
| Operational vibration | MIL-STD-810G: 514.6, procedure I (up to 10g) |
| Shock | MIL-STD-810G: 516.6, procedure V (40g, 11ms); 516.4, procedure 1 (30g, 11ms); |
| Acceleration loads | MIL-STD-810G: Method 513.6 (operational: 24g, ultimate load: 35.9g) |
Related products
GROUND & SHIPBOARD ETHERNET SWITCHES
CR-6200 MIL SERIES | 128pins – MILITARY ETHERNET SWITCH & ROUTER
$0.00
- 2x 128 pins D38999 both with N keying for 24x 10/100/1000BASE-T and 4x 10G-T FAS-T connectors
- 28VDC (22-32VDC)
- Approved for aircraft environmental and EMC requirements
- PTP 1588 GMC accuracy better than 30 nanoseconds
GROUND & SHIPBOARD ETHERNET SWITCHES
CR-6200 MIL SERIES | 22pins D38999 – MIITARY SWITCH & ROUTER
$0.00
- Managed Military switch w/10x D38999 connector for 20×10/100/1000BASE-T
- Also 2x10G-SR in one D38999
- MIL environmental & EMC Approved
- PTP 1588 GMC or TC/SC with PTP version translation (v1/v2) support
MISSION MANAGEMENT
$0.00
FLIGHT-RATED ETHERNET SWITCHES
$0.00
- 2x 128 pins D38999 both with N keying for 24x 10/100/1000BASE-T and 4x 10G-T FAS-T connectors
- 28VDC (22-32VDC)
- Approved for aircraft environmental and EMC requirements
- PTP 1588 GMC accuracy better than 30 nanoseconds
GROUND & SHIPBOARD ETHERNET SWITCHES
$0.00
- Up to 49 x 10/100/1000Base-Tx ports in RJ45 connectors
- Up to 4 x 10gigabit ports in LC connectors
- Commercial Off the Shelf (COTS)
- Optional Embedded Services Router
FLIGHT-RATED ETHERNET SWITCHES
CM-6200 AER SERIES | FAS T or FAS X – MANAGED AIRCRAFT ETHERNET SWITCH
$0.00
- Up to 24 x 10/100/1000Base-Tx ports in D38999 or FAS-T connectors
- Up to 4 x 10gigabit ports in FAS-T connectors or a MT38999 connector
- Approved for aircraft environmental & EMC
- PTP 1588 GMC or TC/SC
GROUND & SHIPBOARD ETHERNET SWITCHES
$0.00
- Managed Military Switch & Router
- PTP 1588 Grand Master Clock
- 13xRJ45 for 13x 1G-T
- Complies with military environmental & EMC requirements
FLIGHT-RATED ETHERNET SWITCHES
$0.00
- Managed Military Switch & Router
- PTP 1588 Grand Master Clock
- 13xRJ45 for 13x 1G-T
- Complies with military environmental & EMC requirements