CM-6200COMe MIL | ADVANCED MISSION MANAGEMENT SYSTEM

• SWITCHING: The CM-6200COMe AMMS comes standard with a fully managed Layer 2/3 Gigabit/10 Gigabit switch that provides a powerful set of networking features, including support for IPv4 multicast traffic filtering according to static filters or IGMP snooping, Virtual Local Area Networks (VLANs), port control (speed/mode/statistics, flow control), Quality of Service (QoS) traffic prioritization, Link Aggregation (802.3ad), SNMP v1/v2/v3 management, secure authentication (802.1X, ACLs, Web/CLI), port mirroring and redundancy based on RSTP/MSTP or High-availability Seamless Redundancy (HSR).
• ROUTING: The CM-6200COMe AMMS can optionally be equipped with full dynamic Layer 3 routing capability. Currently, OnTime Networks offers the following three (3) Layer 3 router options:
  • a. OnTime VyOS router package
  • b. Cisco 5921 Embedded Services Router (ESR) with Advanced Enterprise protocols
  • c. Architecture Technology Corp. (ATC) CRR-1000-5 Routing and Encryption Suite (ARES) with NIAP, CSfC, and Common Criteria (CC) certification
• FIREWALL: The CM-6200COMe AMMS can optionally be equipped with a firewall network security system that monitors and controls incoming and outgoing network traffic based on predetermined security rules. A firewall typically establishes a barrier between a trusted internal network and untrusted external network, such as the Internet.
• GPS: The CM-6200COMe AMMS can optionally be equipped with the GNSS Time Server Capability (IEEE 1588 PTP, NTP, IRIG-B and PPS) which delivers high-integrity precision timing in demanding applications worldwide. Support for BeiDou and GLONASS constellations in addition to GPS enables compliance with national requirements. The concurrent GNSS receiver can receive and track up to three (3) GNSS systems simultaneously. By default, the receiver is configured for concurrent GPS and GLONASS, including QZSS reception. The integrated GNSS Time Server is designed for today’s modern, network-centric applications and further accommodates an OCXO with 0.1ppm. In addition to utilizing the integrated GNSS receiver, the unit can be synchronized by an external reference, such as an external GPS receiver, via NMEA telegram and PPS input or an IRIG-B DC input source.
• CPU: Multiple Central Processing Units
• GPU: Multiple Graphics Processing Units as well as NTP Network Time Server (NTS)
• PROCESSING UNIT: The CM-6200COMe AMMS can optionally be equipped with multiple COM Express® Type 6 Single Board Computer (SBC) modules for customer software. The CPU operating system can be based either on Windows 10 or Linux.

For example, possible CPU solutions include: AMD Ryzen™

• • 2x AMD V1807B, 4x 3.35 GHz (3.75 GHz)
  • Power consumption per CPU: 35-54 W
  • 8 GB soldered RAM (up to 32G with RAM modules)
  • Integrated SoC (Vega 11 Graphics), 1.8TFLOPS

• • 2 x Intel® Core™ i7-8665UE, 4x 1.7 GHz, GT2
  • Power consumption per CPU: 15W
  • 8 GB soldered RAM (up to 32G with RAM modules)
  • On-board disk up to 1TB. Note: On-board disk has impact on available GPU PEG lanes.

• • 2x NVIDIA 1050Ti
  • Power consumption per GPU: up to 60W
  • 768 CUDA cores · 2.3TFLOPS

• • 1x GVA Video Adapter FPGA board to convert camera interfaces
  • 2x Video Watchdog FPGA boards to check video integrity
  • FIBER CONNECTION: The CM-6200COMe AMMS integrates a well-designed fiber optic interconnect solution for mission-critical military systems that demand higher data transmission rates over longer distances to drive radar, avionics, and surveillance systems.
• SOFTWARE: The CM-6200COMe AMMS can offer various Real-Time Operating Systems, such as Windows 10®, or Linux®
• BUILT-IN TESTING: The CM-6200COMe AMMS offers Built-in Test (BIT), a test solution to improve the reliability, safety, and security of mission-critical applications. The built-in BIT provides a level of confidence in the correct operation of the CM-6200COMe AMMS platform at both power-up and during normal operation.

• POWER SUPPLY: The CM-6200COMe AMMS offers a dual power supply implementation for redundancy. Each power supply can power the entire platform, and only one supply runs at a time. Only the primary voltage supply is used in a normal situation, but if this supply fails, the secondary power supply starts running to keep the platform powered up. The switch between the power supplies is seamless. The standby power supply consumes minimal power (no active internal loads).
• EXTERNAL MASS STORAGE DEVICE: The CM-6200COMe AMMS offers the option to connect two (2) external mass storage devices. Each drive can provide up to 4 TB of storage. The removable drives are mounted in a rugged docking bay, allowing quick removal and replacement with an alternate SSD. This feature is also useful when handling classified information, as the SSD can be removed and stored in a secure location.
• VERSATILE I/O: The CM-6200COMe AMMS offers multiple built-in I/O and flexible add-in card options via the COM Express® Type 6 standard. Choose from a wide range of standard digital and analog interfaces to fit your exact requirements.
• CUSTOMIZATION: OnTime Networks specializes in customizing its solutions to specific customer needs. The open architecture and flexibility of the CM-6200COMe AMMS allow for a wide variety of customization options.
• MOUNTING OPTIONS: The 6200COMe AMMS offers fixed mounting or tray mounting solutions for space efficiency, with a small footprint and compact size designs.
• SUPPORTABILITY: A key consideration during the design phase of the CM-6200COMe AMMS was to make it sustainable and highly reliable in order to match the long lifecycle requirements of most military vehicles and aircraft applications and to allow to update system capabilities.
• DOCUMENTATION & DATA: OnTime Networks can provide an extensive documentation and data package in support of early deployment, including environmental/EMI qualification test reports, mean time between failure (MTBF) reliability analysis, failure modes and effects analysis (FMEA), design verification test (DVT) reports, and more
• RUGGED: The CM-6200COMe AMMS is designed for harsh aircraft and military environments. The platform offers a wide operating temperature range {-32°C .. 63°C] with ruggedized military-approved connectors. The unit is designed to comply to MIL- AECTP 300 (Ed3) Method 304 – Procedure I, DEF(AUST)5168, 461F/G and 1275E.
• INTEROPERABILITY: The CM-6200COMe AMMS supports all relevant IEEE Ethernet standards. Interoperability with other PTP devices is ensured based on extensive testing.
• MANAGEMENT: The CM-6200COMe AMMS offers full management based on HTTP, telnet, CLI, or SNMP v1/v2/v3.
• VERSION TRANSLATION: The CM-6200COMe AMMS, with its unique embedded PTP version translator feature, allows Slave Clocks of both PTPv1 and PTPv2 to co-exist in the same network. The need for PTP version translation is driven by the fact that PTPV1 (IEEE 1588 2002) is not backward compatible with PTPv2 (IEEE 1588 2008). Both PTP versions cannot co-exist in the same network unless a PTP version translator is used. OnTime Networks offers a cost-efficient solution by introducing a PTP version translation feature into its products which helps to protect your PTPv1 investments. With the embedded PTP version translation you can use your legacy PTPv1 equipment alongside your new PTPv2 equipment without the need to upgrade or change the configuration of old PTPv1 equipment.
• QUALITY OF SERVICE: The CM-6200COMe AMMS offers advanced traffic shaping and quality-of-service techniques
• VLAN: The CM-6200COMe AMMS offers port based VLAN (static) or dynamic VLAN according to IEEE802.1Q are supported.
• SECURITY: The CM-6200COMe AMMS supports to Enable/Disable ports, MAC based port security, Port-based network access control (802.1x), VLAN (802.1Q ) to segregate and secure network traffic, Radius centralized password management and SNMPv3 encrypted authentication and access security
• CONNECTORS: The CM-6200COMe AMMS front panel flexibility allows for custom connector layouts with client logo, connectors & silk-screening
• DIMENSIONS:
  • Height: 186.5 mm (7.34”) fan less solution 143 mm (5.63”) fan solution
  • Depth: 390mm (15.35”) excluding connectors 413mm (16.26”) including connectors
  • Width: 250mm (9.84”)