Rugged Ethernet & Timing Solutions
The CM-4004F0-GMC-MIL is a fully rugged managed gigabit Ethernet switch specially designed to operate reliably in harsh climatically and noisy electrical demanding environments (e.g. high altitude, extreme shock, and vibration, wide temperatures, humidity, dust and water exposure, noisy EMI, dirty power) of military applications. The platform is an advanced and highly engineered switch that addresses complexity, enables modularity, and provides growth, while delivering optimal performance for Space, Weight, Power and Cost (SWaP-C) constrained military applications onboard military vehicles. The unit complies with the military environmental, EMC, and power input requirements.
The CM-4004F0-GMC-MIL is a fully rugged managed gigabit Ethernet switch specially designed to operate reliably in harsh climatically and noisy electrical demanding environments.
| CONNECTORS | 2x 22 pins D38999 and 3 x coax for 4x 1G-T, GPIO and GNSS antenna, 2x 22 pins D38999 for 4x 1G-T and GPIO |
|---|---|
| POWER HOLDUP |
| Switch protocols | |||
| Standards | IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1X for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 1588 (PTPv1 and PTPv2) |
||
| MAC table | 8192 MAC addresses | ||
| Priority queues | 8 | ||
| Switch fabric properties | Store-and-forward and full wire speed on all ports | ||
| Security Features | Enable/disable ports, MAC based port security | ||
| Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic. Radius centralized password management SNMPv3 encrypted authentication and access security |
|||
| Management | HTTP/HTTPS, telnet/SSH, CLI and SNMP v1/v2/v3 | ||
| Built-in test | Built-in test procedure performed at boot time. Continuous BIT procedure when device is powered |
||
| Other protocols | IGMP snooping (up to 1024 multicast filters) Static multicast filter setting Port rate limiting DHCP TOS/Diffserv supported Quality of Service (802.1Q) for real-time traffic VLAN (802.1Q) with VLAN tagging and MVR Port configuration, status, statistics, monitoring, security |
||
| Connectors | |||
| Power connector | 10 pin MMP (2M 801-011-07ZNU7-10PA), screw | ||
| Connector spacing | According to MIL-STD-1472F | ||
| Data Zeroization Support | |||
| Data Zeroization | To erase Non-Volatile Flash Memory and Restore Board to Factory Default Config- uration. Available via HTTP and CLI |
||
| Power | |||
| Power Consumption (Typ.) | 12 | ||
| Overload Current Protection | Yes | ||
| Reverse Polarity Protection | Yes | ||
| Power input | 28VDC | ||
| Hold-up | No Power Hold Up | ||
| Physical Characteristics | |||
| Enclosure | Aluminum case | ||
| Dimension (W * D * H) | 149mm (W) x 95mm (D) x 45mm (H) / 5.86in (W) x 3.74in (D) x 1.78in (H) | ||
| Weight | 930g / 2.05lbs. | ||
| Surface finish | Powder paint on top of SurTec 650 | ||
| EMC/Enviromental | |||
| Conducted Emission | MIL-STD-461F: CE102, 10KHz – 10MHz, power leads | ||
| Conducted Susceptibility | MIL-STD-461F/G: CS101, Power Leads; CS114, Bulk Cable Injection, 10 KHz – 200 MHz; CS115, Bulk Cable Injection, 10 KHz – 200 MHz; CS116, Damped Sinusoidal Transients, Cables and Power Leads, 10 KHz – 100 MHz; CS118, Personnel Borne Electrostatic Discharge (ESD) |
||
| Radiated Emission | MIL-STD-461F: RE101, Magnetic Field, 30Hz – 100KHz, Army; RE102, Electric Field |
||
| Radiated Susceptibility | MIL-STD-461F: RS103, 2MHz-40MHz, 200V/m | ||
| Power input | MIL-STD-1275E | ||
| Operational Temperature | MIL-STD-810G: 501.5, 502.5 and 503.5, [-40..+71]C◦ | ||
| Storage Temperature | MIL-STD-810G: 502.5, [-40..+85]C◦ | ||
| Altitude | MIL-STD-810G: 500.5, 85.000ft | ||
| Operational vibration | MIL-STD-810G: 514.6, procedure I (up to 10g) | ||
| Shock | MIL-STD-810G: 516.6, procedure V (40g, 11ms); 516.4, procedure 1 (30g, 11ms); | ||
| Acceleration loads | MIL-STD-810G: Method 513.6 (operational: 24g, ultimate load: 35.9g) | ||
| CM-4012F0-MIL | ||
| CM-4000 | ||
| MIL | ||
| T – PTP TC | ||
| 0 – No PTP | ||
| NTP | ||
| S – Standard NTP server | ||
| C – NTP client | ||
| 0 – No NTP | ||
| 0 – No Tap | ||
| 2F – 2x 22 pins D38999 and 3 x coax for 4x 1G-T, GPIO and GNSS antenna 82 – 2x 22 pins D38999 |
||
| 0C – Mighty Mouse, 37 pins connectors for 12x 1G-T | ||
| 54 – RJ45 and LC, 8x 1G-T and 10x 1G-X (LC) 11 – RJ45 and LC, 8x 1G-T and 10x 1G-SX (LC) 12 – RJ45 and LC, 8x 1G-T and 10x 1G-LX (LC) 62 – 2x 55 pins D38999 (2xN – ELN) for 12x 1G-T 65 – 2x 55 pins D38999 (N+A – BZN) for 12x 1G-T 81 – 2x 55 pins D38999 (N+A – ELN) for 12x 1G-T 63 – 1x 55 pins D38999 for 6x 1G-T |
||
| F – 149x95x45mm P – 149x95x45mm with LEDs |
||
| Power input | ||
| B – 28VDC | ||
| Power connector | ||
| A – 10 pin MMP (2M 801-011-07ZNU7-10PA), screw | ||
| Power hold-up | ||
| 0 – No Power Hold Up | ||
| 2 – 250ms | ||
FLIGHT-RATED ETHERNET SWITCHES
GROUND & SHIPBOARD ETHERNET SWITCHES
FLIGHT-RATED ETHERNET SWITCHES
CM-6200 AER SERIES | 128pins – MANAGED AIRCRAFT ETHERNET SWITCH
EMBEDDED/OEM
FLIGHT-RATED ETHERNET SWITCHES
GROUND & SHIPBOARD ETHERNET SWITCHES
GROUND & SHIPBOARD ETHERNET SWITCHES
CR-6200 MIL SERIES | 128pins – MILITARY ETHERNET SWITCH & ROUTER
