CM-6200 MIL SERIES | 22pins D38999 – MILITARY ETHERNET SWITCH

Name: CM-6200 MIL SERIES | 22pins D38999 - MILITARY ETHERNET SWITCH
SKU: CM-6200-22-MIL
Availability: InStock

The CM-6200 with 22pins D38999 contains ruggedized managed gigabit Ethernet switches specially designed to operate reliably in harsh climatically and noisy electrical demanding environments (e.g. high altitude, extreme shock, and vibration, wide temperatures, humidity, dust, and water exposure, noisy EMI, dirty power) of military applications. The switches enable modularity and provide growth while delivering optimal performance for Size, Weight, Power, and Cost (SWaP-C) constrained military applications onboard military vehicles.

CONNECTORS

Clear

The CM-6200 with 22pins D38999 is a fully rugged managed gigabit Ethernet switch specially designed to operate reliably in harsh climatically and noisy electrical demanding environments.

CONNECTORS

16 – 10x 22 pins D38999 for 20x 1G-T and 4x 10G-SR in one MT38999, 17 – 10x 22 pins D38999 for 20x 1G-T and 2x 1G-SX and 2x 10G-SR in one MT38999, 18 – 10x 22 pins D38999 for 20x 1G-T and 4x 1G-SX in one MT38999, 2C – 10x 22 pins D38999 for 20x 1G-T, 58 – 10x 22 pins D38999 for 20x 1G-T and 2x 1G-SX and 2x 10G-SR in one D38999, 6B – 9x 22 pins D38999 for 18x 1G-T, 2x 1G-SX in one D38999 and 4x 10G-SR in one D38999

Key Features
Product Data

Up to 24 x 10/100/1000Base-Tx ports in D38999 or FAS-T connectors and up to 4 x 10gigabit ports in FAS-T connectors or a MT38999 connector
Approved for military environmental and EMC requirements
PTP 1588 Grand Master Clock (GMC) or Transparent Clock/Slave Clock (TC/SC) with PTP version translation (v1/v2) support
Built-in GNSS receiver
Time synchronization output interfaces such as GNSS emulation, PPS, IRIG-B 002 (DC) or IRIGB 122 (AM)
NMEA/PPS (external GNSS receiver) or IRIGB-002 (DC) as time base input
NTP server
High end OCXO for extreme clock hold-over capability
A Li battery for powering of the local clock can be used to ensure clock hold-over support when unit is without power. The battery has a lifetime of more than 10 years
Network redundancy based on MSTP/RSTP/STP and/or HSR (option) on the 2 x 1G-SX ports

Ethernet ports
10/100/1000BASE-T 1000BASE-SX 10GBASE-SR	20 2 2
Switch protocols
Standards	IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1X for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 1588 (PTPv1 and PTPv2)
MAC table	32768 MAC addresses
Priority queues	8
Switch fabric properties	Store-and-forward and full wire speed on all ports
Security Features	Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic. Radius centralized password management SNMPv3 encrypted authentication and access security
Management	HTTP/HTTPS, telnet/SSHv2, CLI and SNMP v1/v2/v3
Built-in test	Built-in test procedure performed at boot time. Continuous BIT procedure when device is powered
Other protocols	IGMP snooping (up to 1024 multicast filters) Static multicast filter setting Port rate limiting DHCP TOS/Diffserv supported Quality of Service (802.1Q) for real-time traffic VLAN (802.1Q) with VLAN tagging and MVR Port configuration, status, statistics, monitoring, security
Other I/O
RS232	1 port, settings: 115200, N, 8, 1 (CLI console)
PPS	Pulse-Per-Second (PPS) output
IRIG-B	IRIG-B DC input, IRIG-B DC output (10V into 50Ohm load) and IRIG-B AM output
Connectors
Ethernet copper connectors	D38999
Ethernet fiber connectors	MT38999
GPS antenna connector	Huber+Suhner QN coax connector (24-QMA-50-2-2)
Power connector	5 pin MMP
Connector spacing	According to MIL-STD-1472F
Data Zeroization Support
Data Zeroization	To erase Non-Volatile Flash Memory and Restore Board to Factory Default Config- uration. Available via HTTP and CLI
Power
Power Consumption (Typ.)	58W
Overload Current Protection	Yes
Reverse Polarity Protection	Yes
Power input	28VDC (22-32VDC)
Hold-up	100ms
Physical Characteristics
Enclosure	Aluminum case
Dimension (W * D * H)	250mm (W) x 148.5mm (D) x 106.4mm (H) / 9.84in (W) x 5.85in (D) x 4.19in (H)
Weight	4350g / 9.590lbs.
Surface finish	Powder paint on top of SurTec 650
EMC/Environmental
Conducted Emission	MIL-STD-461F: CE102, 10KHz – 10MHz, power leads
Conducted Susceptibility	MIL-STD-461F/G: CS101, Power Leads; CS114, Bulk Cable Injection, 10 KHz – 200 MHz; CS115, Bulk Cable Injection, 10 KHz – 200 MHz; CS116, Damped Sinusoidal Transients, Cables and Power Leads, 10 KHz – 100 MHz; CS118, Personnel Borne Electrostatic Discharge (ESD)
Radiated Emission	MIL-STD-461F: RE101, Magnetic Field, 30Hz – 100KHz, Army; RE102, Electric Field, 2MHz – 18GHz for navy mobile and army ground conditions
Radiated Susceptibility	MIL-STD-461F: RS103, 2MHz-40MHz, 200V/m
Power input	MIL-STD-1275E; DEF STAN 61-5, Part 6, issue 6
Operational Temperature	MIL-STD-810G: 501.5, 502.5 and 503.5, [-40..+71]C^◦
Storage Temperature	MIL-STD-810G: 502.5, [-40..+85]C^◦
Altitude	MIL-STD-810G: 500.5, 85.000ft
Operational vibration	MIL-STD-810G: 514.6, procedure I (up to 10g)
Shock	MIL-STD-810G: 516.6, procedure V (40g, 11ms); 516.4, procedure 1 (30g, 11ms);
Acceleration loads	MIL-STD-810G: Method 513.6 (operational: 24g, ultimate load: 35.9g)

Login/Register

CM-6200 MIL SERIES | 22pins D38999 – MILITARY ETHERNET SWITCH

OUR MISSION IS TO DELIVER:

OnTime Networks AS

OnTime Networks LLC

Fill the form to get product quote

Subscribe Now

Subscribe Now

CM-6200 MIL SERIES | 22pins D38999 – MILITARY ETHERNET SWITCH

Related products

OUR MISSION IS TO DELIVER:

OnTime Networks AS

OnTime Networks LLC

Fill the form to get product quote