Rugged Ethernet & Timing Solutions
The CR-6900 MIL Series contains ruggedized managed gigabit and 10gigabit Ethernet switches with router support specially designed to operate reliably in harsh climatically and noisy electrical demanding environments (e.g. high altitude, extreme shock, and vibration, wide temperatures, humidity, dust and water exposure, noisy EMI, dirty power) of military applications. The switches/routers enable modularity and provide growth while delivering optimal performance for Size, Weight, Power, and Cost (SWaP-C) constrained military applications onboard military vehicles. The units are designed to meet the environmental requirements of MIL-STD 810 and the EMI/EMC requirements (Conducted and Radiated Emissions and Susceptibility) of MIL-STD-461 and MIL-STD-1275.
CR-6900-RJ45-LC MIL SERIES | MANAGED MILITARY SWITCH & ROUTER
| #1G-12CU | 1, 2, 3, 4 |
|---|---|
| #1G-12SFP | 1, 2, 3, 4 |
| POWER | A – 115-230VAC, B – 28VDC |
| Ethernet ports | ||
| 10/100/1000BASE-T 100BASE-X/1000BASE-X |
13 12; SFP types: 100BASE-FX-MM, 100BASE-LX, 1000BASE-SX or 1000BASE-LX |
|
| Switch protocols | ||
| Standards | IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1X for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 1588 (PTPv1 and PTPv2) |
|
| MAC table | 32768 MAC addresses | |
| Priority queues | 8 | |
| Switch fabric properties | Store-and-forward and full wire speed on all ports | |
| Security Features | Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic. Radius centralized password management SNMPv3 encrypted authentication and access security |
|
| Management | HTTP/HTTPS, telnet/SSHv2, CLI and SNMP v1/v2/v3 | |
| Built-in test | Built-in test procedure performed at boot time. Continuous BIT procedure when device is powered | |
| Other protocols | IGMP snooping (up to 1024 multicast filters) Static multicast filter setting Port rate limiting DHCP TOS/Diffserv supported Quality of Service (802.1Q) for real-time traffic VLAN (802.1Q) with VLAN tagging and MVR Port configuration, status, statistics, monitoring, security |
|
| Router/Firewall protocols | ||
| IPv4/IPv6 routing | BGPv4, BGPv6 OSPFv2 RIPv2 Static routes Policy based routing Equal cost multipath |
|
| VPN | SSL-based OpenVPN, OpenVPN client Auto configuration Site to site VPN (IPSec for IPv4 and IPv6) |
|
|
|
Remote VPN (PPTP, L2TP, IPsec) | |
| Tunnels | PPPoE, GRE, IPIP, SIT, static L2TPv3, VXLAN | |
| IP address management | Static DHCP server, DHCP client, DHCP relay Dynamic DNS, DNS forwarding DHCPv6 Server, DHCPv6 Client, DHCPv6 Relay |
|
| Firewall | Stateful inspection firewall Zone based firewall P2P filtering IPv6 firewalling Time- based firewall rules Rate limiting ICMP Type filtering Stateful failover |
|
| Management | Integrated CLI Telnet SSHv2 Radius SNMP Single configuration file |
|
| Additional security | Priority queuing Network emulator Round Robin Random/Weighted Random Classful queuing Ethernet header matching VLAN tag IPv6 address Port mirroring |
|
| Shaping | QoS policies as drop tail fair queue Traffic redirection |
|
| High availability | Stateful firewall /NAT failover VRRP Clustering Configuration replication IPSec VPN clustering Protocol fault isolation |
|
| Multicast | PIM-SM (for WAN routing), IGMP snooping and MVR | |
| Flow accounting | NetFlow and sFlow | |
| NAT | Source/Destination NAT Port forwarding One to one, one to many and many to many translations |
|
| Other I/O | ||
| RS232 | 1 port, settings: 115200, N, 8, 1 (CLI console) |
|
| PPS | Pulse-Per-Second (PPS) output | |
| Connectors | ||
| Ethernet copper connectors | RJ45 | |
| Power connector | 3pins IEC320C14 for AC | |
| Connector spacing | According to MIL-STD-1472F | |
| Data Zeroization Support | ||
| Data Zeroization | To erase Non-Volatile Flash Memory and Restore Board to Factory Default Configuration. Available via HTTP and CLI | |
| Power | ||
| Power Consumption (Typ.) | 59W | |
| Overload Current Protection | Yes | |
| Reverse Polarity Protection | Yes | |
| Power input | 115-230VAC | |
| Hold-up | No Power Hold Up | |
| Physical Characteristics | ||
| Enclosure | Aluminum case | |
| Dimension (W * D * H) | 482.6mm (W) x 400mm (D) x 44mm (H) / 18.98in (W) x 15.75in (D) x 1.73in (H) | |
| Weight | approx. 10kg / 22.7lbs. | |
| Surface finish | Powder paint on top of SurTec 650 | |
| EMC/Enviromental | ||
| Conducted Emission | IEC55032:2015; IEC61000-3-2:2014; IEC61000-3-3:2013 | |
| Conducted Susceptibility | IEC61000-4-2:2009 (ESD, 8KV); IEC61000-4-4:2012 (criteria B); IEC61000-4-5:2014 (criteria B); IEC61000-4-6:2014 (criteria A); IEC61000-4-11:2004 (AC voltage dips – criteria B and C, AC voltage interrupts – criteria C); IEC61000-4-13:2002+A1:2009 |
|
| Radiated Emission | IEC55032:2015 | |
| Radiated Susceptibility | IEC61000-4-3:2006 (criteria A) | |
| Operational Temperature | MIL-STD-810G: 501.5 and 502.5, [-40..71]C◦ | |
| Storage Temperature | MIL-STD-810G: 502.5, [-40.. 85]C◦ | |
| Operational vibration | PSD: 5-500Hz: 2.5 – 0.03gG2/Hz, 2h per axis (operational) PSD: 5-500Hz: 2.8 – 0.175gG2/Hz, 8h per axis (non-operational) |
|
| Shock | 20g, 18ms | |
FLIGHT-RATED ETHERNET SWITCHES
FLIGHT-RATED ETHERNET SWITCHES
FLIGHT-RATED ETHERNET SWITCHES
FLIGHT-RATED ETHERNET SWITCHES
GROUND & SHIPBOARD ETHERNET SWITCHES
CM-6200 MIL SERIES | 22pins D38999 – MILITARY ETHERNET SWITCH
FLIGHT-RATED ETHERNET SWITCHES
CM-6200 AER SERIES | FAS T or FAS X – MANAGED AIRCRAFT ETHERNET SWITCH
GROUND & SHIPBOARD ETHERNET SWITCHES
CR-6200 MIL SERIES | 22pins D38999 – MIITARY SWITCH & ROUTER
GROUND & SHIPBOARD ETHERNET SWITCHES
